Intec - Force/1

THE FORCE/1 INSULATION BLOWER
The Perfect Do-It-Yourself and Rental Workhorse!

Exceptional value for the small
contractor and the most popular
DIY machine going.

Whether a small contractor, a rental company, or a do-it-yourselfer, the FORCE/1 is the perfect piece of equipment for you.

With a powerful 3/4 hp motor and a 104 CFM, 3.0 PSI blower, the FORCE/1 will insulate a 1,000 sqf attic to an R19 value in just over 1 hour! ¹

EXCEPTIONAL PERFORMANCE
Today's customers demand nothing less than a reliable, solid performer that is easy to use. That's why the FORCE/1 is so successful. It is the only Do-It-Yourself machine capable of blowing over 500 lbs of material per hour.

TOTAL RELIABILITY
Because no insulation material actually goes through the blower, the FORCE/1 is a virtual workhorse, requiring only minimal maintenance and downtime. Direct Drive means there are no chains that wear out or need to be adjusted, ever.

AND EASE OF USE
Setting up the FORCE/1 on a job site is simple, quick and easy. And clean-up at the end of the job is equally efficient. Performance, reliability and ease of use: together they make the FORCE/1 the insulation blower of choice.

THE FORCE/1 COMES COMPLETE WITH:

100 feet of 2 ½ inch blowing hose
One 2 ½ inch stainless steel hose connector
Three 2 ½ inch stainless steel hose clamps
50 foot attached power cord
100 foot dual remote control
6 inch wheels
Pinset material slide gate


• Polyethylene Construction • 100’ Attached Dual Remote • 50’ 14/3 Attached Power Cord • Direct Drive Transmission • ¾ hp Agitator Motor • 6–Vane Airlock Chamber • Urethane Airlock Seals • Agitator Motor Relay Control New! Machine Options	Height Width Weight Hopper Capacity Hose Size Blower Drive Motor Transmission Airlock Electric Power Requirements Agitator Warranty	41" 32 ¼" 177 lbs. 4¼ cu. ft. — 25 lbs. 2 ½" 2–stage, 8 amps, 104 cfm, 3.0 psi (avg) ¾ hp - 8.4 amps Custom, Direct Drive 10" Steel 115V/220V 50/60Hz One 20 amp, 115V circuit 3 Vane, CRS 1 Year Limited

Cellulose: 540 lbs/hr ¹ Fiberglass: 187 lbs/hr ² * Please see below for production rate details.	Attics Sidewalls Hydromulching

JUST ASK OUR CUSTOMERS
Here is what our customers have to say about the FORCE/1:

“We have been using FORCE/1’s for many years. FORCE/1 is a dependable unit with minimum maintenance”
Greenfiber “Cocoon” Insulation

“FORCE/1 is the perfect rental piece of equipment… low maintenance, affordable and dependable”.
The Home Depot

“Intec and the FORCE/1 can help increase your profits. I’m impressed with the compact, lightweight design. Homeowners and contractors alike look forward to using this machine.”
Reed Erven Consulting

“Our FORCE/1 is maintenance–free, out most of the time, and we haven't spent 5¢ on it.”
Turner Rental, Birmingham, AL

“Since purchasing our FORCE/1, our insulation sales have at least doubled.”
Triple-S Center, Butte, MT

“Never needs any service.”
Grand Rental Station, Belleville, IL

“We have distributed Force blowing machines and replacement parts for over 15 years. The Force equipment is durable, portable and very productive.”
Champion Insulation, Lomira, WI

Complete FORCE/1 Manual (PDF)

¹ Production data based on loose fill cellulose fiber and 100’ of 2½” hose on a 16’ lift.
² Production data based on fiberglass blowing wool and 100’ of 2½” hose on a 16’ lift.
Production data provided to assist customers in determining the right product for their needs. Please refer to the manufacturer's individual product labeling for more information on expected production rates for specific materials.

Phone: 303-833-6644     Toll free: 800-666-1611     Fax: 303-833-6650
PO Box 579   3771 Monarch Street  Frederick, CO 80530
info@IntecCorp.com